Design of bionic wet adhesion 2D micro-force sensor and experimental study

HE Bin; CAI Mi; WANG Kun

doi:10.13873/j.1000-97872014.03.039

Chinese

您当前的位置：

首页 >

文章列表页 >

Design of bionic wet adhesion 2D micro-force sensor and experimental study

更新时间：2025-09-11

- Design of bionic wet adhesion 2D micro-force sensor and experimental study
- Vol. 33, Issue 3, Pages: 79-81(2014)
- 作者机构：
  
  1. 同济大学电子信息工程学院
  2. 同济大学机械工程学院
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872014.03.039
  CLC： TP212.9
- Published：2014
- 稿件说明：
移动端阅览
[1]何斌,蔡蜜,王昆.仿生湿吸二维微力传感器设计与试验研究[J].传感器与微系统,2014,33(03):79-81.

HE Bin, CAI Mi, WANG Kun. Design of bionic wet adhesion 2D micro-force sensor and experimental study[J]. 2014, 33(3): 79-81.
[1]何斌,蔡蜜,王昆.仿生湿吸二维微力传感器设计与试验研究[J].传感器与微系统,2014,33(03):79-81. DOI： 10.13873/j.1000-97872014.03.039.

HE Bin, CAI Mi, WANG Kun. Design of bionic wet adhesion 2D micro-force sensor and experimental study[J]. 2014, 33(3): 79-81. DOI： 10.13873/j.1000-97872014.03.039.

摘要

设计了一种L型的二维微力传感器

该二维微力传感器采用悬臂梁式结构。在弹性力学和材料力学基础上

利用Solidworks三维建模软件和ANSYS仿真软件对传感器分别进行模型建立和有限元应变分析。对该二维微力传感器的实体进行标定

得出了力和输出电压之间的关系。然后

在设计与分析二维微力传感器的基础上

研制了二维微力传感器阵列测试系统。最后

在测试系统实施了不同预压力下的湿吸力测试试验

验证了传感器和系统的可靠性。

Abstract

A L-shaped two-dimensional（ 2D） micro-force sensor with cantilever beam structure is designed.On the basis of elastic mechanics and mechanics of materials

to build model with 3D software Solidworks and stress analysis with simulation software ANSYS.Calibrate sensor entity

to obtain relationship between force and output voltage.On the basis of design and analysis on 2D micro-force sensor

a 2D array test system of micro-force sensors is developed.Finally

wet adhesion test experiments under different preload are implemented on test system to verify reliability of sensor and system.

关键词

Keywords

references

利用SolidWorks提高ANSYS有限元分析效率 [J]. 何青. 化工设备与管道 . 2013(05)

动物吸附机制的理论研究及应用现状 [J]. 何斌,周群,岳继光. 同济大学学报(自然科学版) . 2007(06)

Stewart型六维力传感器的静态解耦实验 [J]. 金振林,岳义. 仪器仪表学报 . 2006(12)

ANSYS路径映射技术在结构分析中的应用 [J]. 胡晓伦,陈艾荣. 交通与计算机 . 2004(03)

有限元网格划分方法应用研究 [J]. 王明强,朱永梅,刘文欣. 机械设计与制造 . 2004(01)

测力传感器设计的应力集中原则 [J]. 朱超甫,陈虎平,刘哲. 传感器世界 . 2001(12)

Views

117

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Bulk metallic glass micro-force sensor

Camera calibration method based on 3D calibration plate

Simulation and experiment of trapezoidal beam vibration energy harvester

Laser Doppler velocimeter online calibration algorithm

Multipoint temperature measurement system based on platinum resistor and its application

Related Author

ZHANG Kaixiang

MA Mingzhe

LIU Ze

SHI Jiahao

WANG Qing

FENG Youyang

SUN Yafeng

WEN Quan

Related Institution

Department of Engineering Mechanics,School of Civil Engineering,Wuhan University

Department of Civil Engineering,School of Civil Engineering,Wuhan University

School of Instrument Science and Engineering, Southeast University

National Defense Key Discipline Laboratory of Fundamental Science of Micro/Nano-Device and System Technology

Microsystem Research Center,Chongqing University

⁰