Design and realization of inductive centre sensing system

PAN Jin-wen1; TONG Shi-zhen2; SHAO Chang-xing1; ZHOU Feng1; WANG Yong1

doi:10.13873/j.1000-97872013.03.042

Chinese

您当前的位置：

首页 >

文章列表页 >

Design and realization of inductive centre sensing system

更新时间：2025-09-11

- Design and realization of inductive centre sensing system
- Vol. 32, Issue 3, Pages: 117-119+123(2013)
- 作者机构：
  
  1. 中国科学技术大学自动化系
  2. 上海科鑫电液控制设备有限公司3. 上海科先电液伺服技术研究所
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872013.03.042
  CLC： TP212
- Published：2013
- 稿件说明：
移动端阅览
[1]潘金文,童世震,邵长星,周烽,王永.电感式对中传感系统设计与实现[J].传感器与微系统,2013,32(03):117-119+123.

PAN Jin-wen1, TONG Shi-zhen2, SHAO Chang-xing1, et al. Design and realization of inductive centre sensing system[J]. 2013, 32(3): 117-119+123.
[1]潘金文,童世震,邵长星,周烽,王永.电感式对中传感系统设计与实现[J].传感器与微系统,2013,32(03):117-119+123. DOI： 10.13873/j.1000-97872013.03.042.

PAN Jin-wen1, TONG Shi-zhen2, SHAO Chang-xing1, et al. Design and realization of inductive centre sensing system[J]. 2013, 32(3): 117-119+123. DOI： 10.13873/j.1000-97872013.03.042.

摘要

针对实际生产中金属带材的跑偏问题

介绍了一种电感式检测装置—电感式对中传感系统。一般电感式传感器测量转换模块输出的都是模拟信号

且需要外加交流电源

使用不便。设计的电感式对中传感系统从电感式传感器的基本原理出发

设计系统结构。实验表明:该系统能够得到优于±0.2 mm的精度。

Abstract

To find a solution for the metal strip deviation problem in actual production

an inductive detecting device

inductive centre sensing system is introduced.The output signal of measurement conversion module of general inductive sensor is analog signal

and the system requires external AC power

which is inconvenient.Starting from the basic principles of the inductive sensor

the system architecture is designed.The design and realization of the hardware interface circuit and MCU program are completed.Experiments show that the system can achieve precision which is prior to ±0.2 mm.

关键词

Keywords

references

高精度电感式传感器测量系统设计 [J]. 郭键,董萍萍. 工具技术 . 2010(06)

高准确度有效值转换电路的设计与实现 [J]. 陈仁伟,朱长青,岳夕彪. 电子测量技术 . 2010(06)

电感式传感器测量转换模块的设计 [J]. 于相斌,徐惠斌,李小奇. 传感器与微系统 . 2010(03)

基于电感式位置检测原理的带钢纠偏控制方法 [J]. 邹凤欣,杨溪林,高增雪,邱忠义. 冶金自动化 . 2006(04)

电感式微位移测量仪的设计与实现 [J]. 石成英,李忠科,林辉,岳开宪. 自动化仪表 . 2005(03)

RC桥式振荡器起振条件的研究及其仿真 [J]. 陈宇宁,卢成健. 玉林师范学院学报 . 2004(05)

电感式对中检测方法的研究 [A]. 杨溪林,邹凤欣,高增雪,邱忠义.第十一届全国自动化应用技术学术交流会论文集[C]. 2006

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design of geomagnetic lock parking management system based on magnetoresistance effect

Design of signal source for NIR spectrometer based on AOTF

Personal injury preventing intelligent controller for greenhouse rolling machine

Design and implementation of portable electrical stimulator for cell culturing

Design of SF₆ on-line monitoring system based on Zig Bee wireless networking

Related Author

QIN Huibin

CHEN Jianan

ZHAO Shuang-long

ZHANG Xiao-chao

ZHANG Jun-ning

MAO Wen-hua

GAI Sha-sha

GUO Qing

Related Institution

College of Electronic Information,Hangzhou Dianzi University

Hulun Buir Agriculture and Animal Husbandry Machinery Technology Promotion Station

Chinese Academy of Agricultural Mechanization Science

School of Electrical Engineering,Zhejiang University

State Grid Heze Power Supply Company

⁰