Design of pulse ultrasonic transmitting circuit based on Boost principle

LIU Jin-ge; SONG Shou-peng; MA Xiao-kun

doi:10.13873/j.1000-97872011.08.046

Chinese

您当前的位置：

首页 >

文章列表页 >

Design of pulse ultrasonic transmitting circuit based on Boost principle

更新时间：2025-09-11

- Design of pulse ultrasonic transmitting circuit based on Boost principle
- Vol. 30, Issue 8, Pages: 100-103(2011)
- 作者机构：
  
  江苏大学测控技术与仪器系
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872011.08.046
  CLC： TP274.53
- Published：2011
- 稿件说明：
移动端阅览
[1]刘金鸽,宋寿鹏,马晓昆.基于Boost原理的脉冲超声发射电路设计[J].传感器与微系统,2011,30(08):100-103.

LIU Jin-ge, SONG Shou-peng, MA Xiao-kun. Design of pulse ultrasonic transmitting circuit based on Boost principle[J]. 2011, 30(8): 100-103.
[1]刘金鸽,宋寿鹏,马晓昆.基于Boost原理的脉冲超声发射电路设计[J].传感器与微系统,2011,30(08):100-103. DOI： 10.13873/j.1000-97872011.08.046.

LIU Jin-ge, SONG Shou-peng, MA Xiao-kun. Design of pulse ultrasonic transmitting circuit based on Boost principle[J]. 2011, 30(8): 100-103. DOI： 10.13873/j.1000-97872011.08.046.

摘要

设计了基于Boost原理的脉冲超声发射电路

并建立了电路的瞬态响应模型。通过对模型的分析

确立了电路参数选取的依据。该电路5 V供电

不需要直流高压模块

可在1

MHz换能器两端产生100 V以上脉冲电压

功耗低

平均电流为30mA

通过匝数比为6/15的变压器对电路阻抗进行匹配

提高了带负载能力

电路触发电压脉冲宽度可调

重复频率可调

已成功用于超声管道压力检测系统中。

Abstract

Pulse ultrasonic transmitting circuit is designed based on Boost principle

and the transient response model of the circuit is established.The selecting basis of the circuit parameters is presented according to the analysis of the model.The circuit can generate pulse voltage more than 100V by a power supply of 5V without high voltage DC transformer.The power consumption of the circuit is low with the average current of 30 mA.This circuit also has the properties of high load capacity by using a transformer with the turn ratio 6/15 to achieve impedance matching

tunable width of the transmitting voltage pulse and repetitive frequency is tunable.

关键词

Keywords

references

超声管外测压中发射电路的设计 [J]. 丁丽娟,宋寿鹏,高福学,易立单. 仪表技术与传感器 . 2009(08)

管道超声内检测发射电路设计 [J]. 戴波,杨卓然,赵晶,田小平. 微纳电子技术 . 2007(Z1)

医用内窥镜超声探头驱动系统的设计 [J]. 肖哲,陈晓冬,李婉晖,郁道银. 传感技术学报 . 2005(03)

大量程超声波回波测距系统的研究 [J]. 陈先中,张争,王伟. 仪器仪表学报 . 2004(S2)

一种新颖的宽带窄脉冲超声波发生电路 [J]. 游江通,刘松平,宋秀荣. 航空制造技术 . 2004(04)

脉冲超声传感器激发/接收电路设计 [J]. 冯红亮,肖定国,徐春广,周世圆. 仪表技术与传感器 . 2003(11)

数字电子技术[M]. 机械工业出版社 , 成立主编, 2004

开关电源的原理与设计[M]. 电子工业出版社 , 张占松,蔡宣三编著, 2004

Views

376

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and optimization based on circular coiled coil modeling

Design and fabrication of electromagnetic driver circuit for insect-inspired flapping-wing micro aerial vehicle

Design and optimization of RF power supply based on class E power amplifier massspectrum

Simulation analysis of defect testing technology based on ultrasonic TOFD method

Application research of MPPT for PV system based onWSNs

Related Author

QIN Huibin

CHEN Jianan

CHEN Chang

SUN Hao

WANG Chen-yang

ZOU Yang

ZHANG Wei-ping

WU Bin-bin

Related Institution

Institute of New Electron Device ＆ Application,Hangzhou Dianzi University

National Key Laboratory of Science and Technology on Nano/Micro Fabrication,Key Laboratory for Thin Film and Micro Fabrication of Ministry of Education,Shanghai Key Laboratory of Navigation and Location-Based Services,Department of Micro-Nano Electronics,School of Electronic Information and Electrical Engineering,Shanghai Jiao Tong University

School of Mechanical Engineering and Mechanics,Ningbo University

School of Information Science and Engineering,Ningbo University

School of Mechanical Engineering,Hubei University of Technology

⁰