Polymer NH<sub>3</sub> sensor based on printing technology

WANG Cong; JI Xin-ming; ZHOU Jia; BAO Zong-ming; HUANG Yi-ping

doi:10.13873/j.1000-97872011.02.040

Chinese

您当前的位置：

首页 >

文章列表页 >

Polymer NH₃ sensor based on printing technology

更新时间：2025-09-11

- Polymer NH₃ sensor based on printing technology
- Vol. 30, Issue 2, Pages: 77-80(2011)
- 作者机构：
  
  复旦大学微电子系ASIC与系统国家重点实验室
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872011.02.040
  CLC： TP212.2
- Published：2011
- 稿件说明：
移动端阅览
[1]王聪,纪新明,周嘉,包宗明,黄宜平.基于打印聚合物薄膜技术的NH_3传感器[J].传感器与微系统,2011,30(02):77-80.

WANG Cong, JI Xin-ming, ZHOU Jia, et al. Polymer NH₃ sensor based on printing technology[J]. 2011, 30(2): 77-80.
[1]王聪,纪新明,周嘉,包宗明,黄宜平.基于打印聚合物薄膜技术的NH_3传感器[J].传感器与微系统,2011,30(02):77-80. DOI： 10.13873/j.1000-97872011.02.040.

WANG Cong, JI Xin-ming, ZHOU Jia, et al. Polymer NH₃ sensor based on printing technology[J]. 2011, 30(2): 77-80. DOI： 10.13873/j.1000-97872011.02.040.

摘要

研究了一种新型的采用打印技术的NH3传感器

探讨了打印"墨水"材料聚苯胺和聚吡咯的制备和"墨水"掺酸比例对NH3传感器敏感度的影响。为了提高传感器灵敏度

分别对传感器的直流和交流阻抗特性进行了研究。结果发现在1.5 kHz左右交流阻抗的测试条件下

传感器灵敏度要较直流阻抗测试高近1个数量级。此外还通过构建1个交流阻抗拟合模型对传感器交流阻抗变化过程作了解释。研究的采用打印技术基于聚合物的NH3传感器具有成本低

可以制作在柔性衬底上和适合大规模生产等特点

在食品加工、养殖业和医疗等领域具有广泛的应用前景。

Abstract

A novel NH3 sensor by using printing technology is proposed.The preparation of ink and the effect of the ratio of acid in polymer to NH3 sensor have been discussed.In order to improve the sensitivity

DC/AC impedance changes with the NH3 concentration is examined and it shows that sensitivity of the sensor is about one order higher than DC impedance at 1.5kHz AC impedance.Additionally

an equivalent circuit model is developed to explain AC impedance spectrum.Owing to the low-cost

high volume production process and producible onto a flexible substrate

NH3 sensor based on polymer by using printing technology has a promising prospect in food processing

aquaculture and medical industry

etc.

关键词

Keywords

references

Ammonia sensitivity of polyaniline films via emulsion polymerization [J] . Shuizhu Wu,Fang Zeng,Fengxian Li,Yinlan Zhu. European Polymer Journal . 2000 (4)

Views

138

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on effect of sintering atmosphere on gas sensitivity of SnO₂ nanomaterials

Preparation of Cr₂O₃/ZnO and gas-sensing properties of ammonia at normal temperature

Ammonia sensor based on flower-like h-MoO₃ nanorods@graphene

Research on gas sensor based on photochemically deposited porous WO₃ films

Research progress in gas sensing fields of novel two-dimensional MXene materials

Related Author

ZHANG Yongjia

HAO Weidong

ZHANG Chenchen

TIAN Yuan

ZHANG Tengfei

XU Shiqiang

LI Yuhan

WANG Hongtao

Related Institution

College of Physics,Taiyuan University of Technology

School of Electronic Information and Optical Engineering,Taiyuan University of Technology

School of Mechanical and Automation Engineering,Wuyi University

College of Ocean Science and Engineering,Shanghai Maritime University

College of Logistic Engineering,Shanghai Maritime University

⁰

Polymer NH3 sensor based on printing technology

DOI：10.13873/j.1000-97872011.02.040

摘要

Abstract

关键词

Keywords

references

Polymer NH₃ sensor based on printing technology