Simulation research on material identification by thermal tactical sensor

ZHOU Lian-jie; LI Jian-qing; WU Jian-feng; WU Jian-jin; BAI Jun-jie

doi:10.13873/j.1000-97872011.02.035

Chinese

您当前的位置：

首页 >

文章列表页 >

Simulation research on material identification by thermal tactical sensor

更新时间：2025-09-11

- Simulation research on material identification by thermal tactical sensor
- Vol. 30, Issue 2, Pages: 11-13(2011)
- 作者机构：
  
  东南大学仪器科学与工程学院
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872011.02.035
  CLC： TP212.11
- Published：2011
- 稿件说明：
移动端阅览
[1]周连杰,李建清,吴剑锋,吴剑进,柏俊杰.温度触觉传感器的材质识别仿真研究[J].传感器与微系统,2011,30(02):11-13.

ZHOU Lian-jie, LI Jian-qing, WU Jian-feng, et al. Simulation research on material identification by thermal tactical sensor[J]. 2011, 30(2): 11-13.
[1]周连杰,李建清,吴剑锋,吴剑进,柏俊杰.温度触觉传感器的材质识别仿真研究[J].传感器与微系统,2011,30(02):11-13. DOI： 10.13873/j.1000-97872011.02.035.

ZHOU Lian-jie, LI Jian-qing, WU Jian-feng, et al. Simulation research on material identification by thermal tactical sensor[J]. 2011, 30(2): 11-13. DOI： 10.13873/j.1000-97872011.02.035.

摘要

采用温度触觉传感器对材质进行识别研究

介绍了一种基于热传导原理的材质识别方法

利用ANSYS软件对温度触觉传感器在不同温度差、不同基板材料和不同被测物体材料不同情形下的热传导进行了仿真实验。仿真结果表明:温度触觉传感器可用于识别吸热系数偏低的材料

接触温度可作为材质识别的一个重要判据。

Abstract

Material identification is studied by a thermal tactical sensor and an identification method based on heat conduction theory is presented.With the ANSYS software

simulation experiments of the thermal tactical sensor in different thermal conditions of temperature difference

substrate materials and tested object materials are studied.The results show that the thermal tactical sensor can identify the materials with lower thermal effusivity.The contact temperature can be used as an important evidence for material identification.

关键词

Keywords

references

传热学[M]. 高等教育出版社 , 赵镇南[编著], 2002

Views

204

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on tactile sensor based on PVDF piezoelectric thin-film

Research on contact model and simulation of flexible tactile sensor with microdome structure

Research on 110 kV power transformer winding modal

Structure design and key technology of hybrid micro energy collector

Dynamic characteristics analysis on blackbody cavity high temperature sensor based on finite element method

Related Author

LIU Jinyue

MA Tao

YANG Ruoxi

DAI Qi

LI Tiejun

NIE Cao

QIAN Guo-chao

GU Hong-xia

Related Institution

School of Mechanical Engineering,Hebei University of Technology

School of Electronic Science & Applied Physics,Hefei University of Technology

Faculty of Information and Automation Engineering,Kunming University of Science and Technology

Yunnan Power Grid Electric Power Research Institute Co Ltd

Science and Technology on Electronic Test and Measurement Laboratory,North University of China

⁰