Research on low pressure gas flow calibration technology

XU Bo; QIAN Li; HUANG Gang

doi:10.13873/j.1000-97872010.08.006

Chinese

您当前的位置：

首页 >

文章列表页 >

Research on low pressure gas flow calibration technology

更新时间：2025-09-11

- Research on low pressure gas flow calibration technology
- Vol. 29, Issue 8, Pages: 63-65(2010)
- 作者机构：
  
  中国航天员科研训练中心
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872010.08.006
  CLC： TH814
- Published：2010
- 稿件说明：
移动端阅览
[1]徐波,钱力,黄刚.低压气体流量标定技术研究[J].传感器与微系统,2010,29(08):63-65.

XU Bo, QIAN Li, HUANG Gang. Research on low pressure gas flow calibration technology[J]. 2010, 29(8): 63-65.
[1]徐波,钱力,黄刚.低压气体流量标定技术研究[J].传感器与微系统,2010,29(08):63-65. DOI： 10.13873/j.1000-97872010.08.006.

XU Bo, QIAN Li, HUANG Gang. Research on low pressure gas flow calibration technology[J]. 2010, 29(8): 63-65. DOI： 10.13873/j.1000-97872010.08.006.

摘要

热式质量流量传感器用于测量35～41 kPa（绝压）的气体流量

需在该工况下对其进行标定。采用文丘里喷嘴作为标准器

在被测流量传感器处构建调压系统

调节压力可至40±0.1 kPa（绝压）

建立低压气体流量标准装置

通过比较流量传感器输出值与文丘里喷嘴标准流量

标定流量传感器。对常压下校准的喷嘴在35～41 kPa（绝压）条件下是否可以作为标准器进行了分析

试验证明:装置的稳定性为0.6%

重复性为0.13%

临界背压比为0.5

低压气体流量标定方法科学可行。

Abstract

The thermal mass flow sensor which is used to measure air flow under the absolute pressure of 35

1kPa

should be calibrated.The Venturi nozzles is used as standard instrument

the system of gas pressure adjusting is built up

the gas pressure can be adjusted to absolute pressure of 40±0.1kPa

so the system of low gas flow measuring standard device is founded

the flow sensor is calibrated by comparing the output value of sensor to the standard flow of Venturi nozzles.Whether the critical Venturi nozzles can be used as calibrating facility or not have been analyzed and tested.From the results of experiments

it is concluded that the stability of the facility is 0.6%

the repeatability is 0.6%

the critical pressure ratio is 0.5

the means of low gas pressure flow calibration is feasible.

关键词

Keywords

references

流量测量节流装置设计手册[M]. 化学工业出版社 , 孙淮清,王建中编著, 2005

流量计量与测试[M]. 中国计量出版社 , 苏彦勋等编著, 1992

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Camera calibration method based on 3D calibration plate

Research on integrated emissivity of non-isothermal blackbody cavity with response surface methodology

Laser Doppler velocimeter online calibration algorithm

Multipoint temperature measurement system based on platinum resistor and its application

Method for line structured light sensor calibration based on homography matrix

Related Author

SHI Jiahao

WANG Qing

FENG Youyang

LIU Bo

ZHENG Wei

LI Haiyang

MA Chao

HE Yongxing

Related Institution

School of Instrument Science and Engineering, Southeast University

School of Electronic Information and Electrical Engineering,Shanghai Jiao Tong University

Shanghai Institute of Measurement and Testing Technology

College of Advanced Interdisciplinary Studies,National University of Defense Technology

Anhui Institute of Metrology

⁰