Study of signal filtering base on rotating arc sensor

HUANG Ling-xiang1; ZHANG Hua1; MA Guo-hong1; XU Yan2

doi:10.13873/j.1000-97872009.03.003

Chinese

您当前的位置：

首页 >

文章列表页 >

Study of signal filtering base on rotating arc sensor

更新时间：2025-09-11

- Study of signal filtering base on rotating arc sensor
- Vol. 28, Issue 3, Pages: 12-14(2009)
- 作者机构：
  
  1. 南昌大学机器人所
  2. 南昌大学信息工程学院电子系
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872009.03.003
  CLC： TG444
- Published：2009
- 稿件说明：
移动端阅览
[1]黄凌翔,张华,马国红,徐燕.旋转电弧传感信号滤波研究[J].传感器与微系统,2009,28(03):12-14.

HUANG Ling-xiang1, ZHANG Hua1, MA Guo-hong1, et al. Study of signal filtering base on rotating arc sensor[J]. 2009, 28(3): 12-14.
[1]黄凌翔,张华,马国红,徐燕.旋转电弧传感信号滤波研究[J].传感器与微系统,2009,28(03):12-14. DOI： 10.13873/j.1000-97872009.03.003.

HUANG Ling-xiang1, ZHANG Hua1, MA Guo-hong1, et al. Study of signal filtering base on rotating arc sensor[J]. 2009, 28(3): 12-14. DOI： 10.13873/j.1000-97872009.03.003.

摘要

旋转电弧焊接过程中信号的滤波与提取是焊接过程中首要解决的问题

介绍了电弧传感的工作原理与焊接信号的特点

对旋转电弧焊接中使用的数字滤波方法做了介绍

通过实验对各个方法做了比较

并提出了一种有效的旋转电弧信号组合滤波方法

实验证明:该方法能更有效地抑制电弧信号的干扰

保留有用的信号特征信息。

Abstract

The primary problem in arc welding using rotating arc sensor is filtering and extraction of the signal during the welding process.The basic principle of arc sensor and welding signal characteristics are introduced.The general digital filters of the rotating arc signal and the comparison of the filters in experiments are produced.An effective combination of signal filtering method applied in rotating arc sensor is put forward.Experiments prove that this method can more effectively restrain the interference of the arc signal and retain the useful information of signal characteristics.

关键词

Keywords

references

电弧传感器的研究现状与展望 [J]. 贾剑平,张华,徐健宁. 焊接 . 2005(11)

低频旋转电弧传感器焊缝跟踪技术 [J]. 屈岳波,洪波,潘际銮,尹懿,袁灿,黄俊. 电焊机 . 2005(04)

旋转电弧传感器的研制 [J]. 熊震宇,张华,贾剑平,潘际銮. 仪表技术与传感器 . 2003(07)

旋转电弧传感焊枪倾角检测及水下焊缝跟踪技术研究 [D]. 叶建雄. 南昌大学 2007

旋转电弧传感器焊枪位姿识别方法研究 [D]. 李月华. 南昌大学 2007

现代弧焊控制[M]. 机械工业出版社 , 潘际銮著, 2000

Views

189

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

IDC-MFM electromagnetic non-destructive testing method for nonferrous metal strips

Digital analysis of geomagnetic signals measured by fluxgate

Design of force sensor signal acquisition and processing system based on STM32

Design of multi-parameter device for marine environment monitoring

Research on feature point detection of discontinuity welding seam

Related Author

SONG Xiaochun

TU Jun

GAO Jian

LI Donglin

CHEN Guo-guang

YANG Zhi-jie

ZHU Yi-jia

FAN Xu

Related Institution

School of Mechanical Engineering,Hubei University of Technology

School of Mechanical and Electrical Engineering,North University of China

Yuxi Industries Group Co Ltd

Faculty of Mechanical Engineering and Mechanics,Ningbo University

Ningbo Institute of Materials Technology and Engineering,Chinese Academy of Sciences

⁰