Numerical simulation of temperature fields and stress fields for planar-type oxygen sensor

ZHANG Xiao-yan1; XIAO Jian-zhong2

doi:10.13873/j.1000-97872008.07.015

Chinese

您当前的位置：

首页 >

文章列表页 >

Numerical simulation of temperature fields and stress fields for planar-type oxygen sensor

更新时间：2025-09-11

- Numerical simulation of temperature fields and stress fields for planar-type oxygen sensor
- Issue 7, Pages: 38-40(2008)
- 作者机构：
  
  1. 上海工程技术大学高等职业技术学院
  2. 华中科技大学模具技术国家重点实验室
- 作者简介：
- 基金信息：
- DOI：10.13873/j.1000-97872008.07.015
  CLC： TP212
- Published：2008
- 稿件说明：
移动端阅览
[1]张晓岩,肖建中.平板式氧传感器温度场与应力场的数值模拟[J].传感器与微系统,2008(07):38-40.

ZHANG Xiao-yan1, XIAO Jian-zhong2. Numerical simulation of temperature fields and stress fields for planar-type oxygen sensor[J]. 2008, (7): 38-40.
[1]张晓岩,肖建中.平板式氧传感器温度场与应力场的数值模拟[J].传感器与微系统,2008(07):38-40. DOI： 10.13873/j.1000-97872008.07.015.

ZHANG Xiao-yan1, XIAO Jian-zhong2. Numerical simulation of temperature fields and stress fields for planar-type oxygen sensor[J]. 2008, (7): 38-40. DOI： 10.13873/j.1000-97872008.07.015.

摘要

对平板式氧传感器的温度场和应力场进行了模拟。温度场的结果显示

锆板在10 s左右前端温度就可以达到均匀

且厚度方向表现出了很好的温度一致性;应力场的结果显示

应力的较大值发生在固定位移与自由端的交界部分。并对平板式氧传感器的印制和装配给出了建议。

Abstract

The temperature fields and stress fields of the planar-type oxygen sensor are simulated.The result of the temperature fields shows that the temperature becomes uniform on the top of the planar-type sensor in 10 s while it also shows good temperature homogeneity in the thickness direction.The maximum stress appears near the junction of the freedom part and the limited part.Some instructive advices on the preparation and assemble of the planar-type oxygen sensor are also referred.

关键词

Keywords

references

基于有限元法的车用氧传感器密封元件受力及变形分析 [J]. 过学迅,徐勇,蔡炳炎. 现代机械 . 2005(02)

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Structural optimization design of the thimble-type oxygen sensor based on ANSYS

Study on technology of water-based tape casting for limiting current oxygen sensor

Study on preparation technology of porous protective coating slurry for oxygen sensor

Research on diffused hole of limiting current oxygen sensor fabricated by screen printing method

Multipoint temperature measurement system based on platinum resistor and its application

Related Author

XIAO Jian-zhong2

ZHANG Xiao-yan1

SHAO Zhiqiang

PI Qianqian

WEN Jiyan

LIU Zhiyuan

WANG Liang

LIU Xi

Related Institution

Advanced Technical Vocational Institute,Shanghai University of Engineering Technology

State Key Laboratory of Material Processing and Die & Mold Technology,Huazhong University of Science & Technology

China Electronics Technology Group Corporation

The 49th Research Institute of China Electronics Technology Group Corporation

College of Information and Communication Engineering,Harbin Engineering University

⁰