Ferrite design for wireless charging coil based on finite element analysis

XIA Xiaoxue; ZHU Yuyu; CAO Xin; GAO Chuanxin; WU Li

doi:10.13873/J.1000-9787(2021)08-0068-05

Chinese

您当前的位置：

首页 >

文章列表页 >

Ferrite design for wireless charging coil based on finite element analysis

更新时间：2025-09-11

- Ferrite design for wireless charging coil based on finite element analysis
- Issue 8, Pages: 68-72(2021)
- 作者机构：
  
  1. 西南科技大学信息工程学院
  2. 四川大学电气工程学院
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2021)08-0068-05
  CLC： TM277;TM724
- Published：2021
- 稿件说明：
移动端阅览
XIA Xiaoxue, ZHU Yuyu, CAO Xin, et al. Ferrite design for wireless charging coil based on finite element analysis[J]. 2021, (8): 68-72.
DOI：

XIA Xiaoxue, ZHU Yuyu, CAO Xin, et al. Ferrite design for wireless charging coil based on finite element analysis[J]. 2021, (8): 68-72. DOI： 10.13873/J.1000-9787(2021)08-0068-05.

摘要

电动汽车无线电能传输(WPT)线圈包括线圈本身、线圈托板和铁氧体三部分。放置在发射、接收线圈垂直方向外侧的铁氧体磁片对电动汽车无线充电系统有增大传输距离和传输效率的作用。为了实现铁氧体磁片的设计

以7.7 kW无线电能传输接收线圈为例

在有限元分析软件ANSYS建立其有限元模型

通过控制变量法对铁氧体磁片参数变化情况下线圈参数的变化进行仿真研究;分析了线圈各参数的特性和相互之间的约束关系;给出无线电能传输线圈铁氧体磁片的设计依据;最后根据分析结果搭建实物模型进行验证。实验结果表明:在线圈尺寸确定时

增加所设计的铁氧体磁片后系统的传输功率可达到7.7 kW

传输效率最高为93.5%。

Abstract

The wireless power transmission（WPT）coil of the electric vehicle includes a coil itself

a coil tray and a ferrite.The ferrite magnetic sheet placed outside the vertical direction of the transmitting and receiving coils has an effect of increasing the transmission distance and the transmission efficiency of the electric vehicle wireless charging system.In order to realize the design of ferrite magnetic sheet

taking the 7.7 kW WPT receiving coil as an example

establishing its finite element model in finite element analysis software ANSYS.Simulation study on the change of coil parameters under the variation of ferrite magnetic sheet parameters by controlled variable method

analyze the characteristics of the parameters of the coil and the constraint relationship between them

the overall design basis for the ferrite magnetic sheet of the wireless energy transmission coil is given

Finally

based on the analysis results

build a physical model to verify.It is found that when the coil size is determined

the transmission power of the system can be up to 7.7 kW and the transmission efficiency is up to 93.5 % after the designed ferrite magnetic sheet is added.

关键词

Keywords

references

Views

362

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design of asymmetric microgripper with large displacement piezoelectric-driven based on flexible mechanism

Research on energy harvesting by piezoelectric polymer thin films with large deflection

Structure optimization and simulation analysis of high-range acceleration sensor

Structural design and fabrication method of diamond hemispherical resonanec microgyroscope

Comparative study of SS type and LCC type inductively coupled power transmission system

Related Author

LI Jing

WANG Lesheng

WANG Haifeng

WANG Shilong

SUN Kaili

HAN Wenman

GUO Tao

GU Liutao

Related Institution

School of Electronic Information Engineering, Henan Institute of Technology

College of Mechanical & Electrical Engineering,Qingdao University

Micron Nanotechnology Research Center of North University of China

Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences

The 50th Research Institute of China Electronics Technology Group Corporation

⁰