Analysis and optimization of coil parameters of inductive abrasive monitoring sensor

CHEN Hao; WANG Liyong; CHEN Tao

doi:10.13873/J.1000-9787(2021)02-0012-03

Chinese

您当前的位置：

首页 >

文章列表页 >

Analysis and optimization of coil parameters of inductive abrasive monitoring sensor

更新时间：2025-09-11

- Analysis and optimization of coil parameters of inductive abrasive monitoring sensor
- Issue 2, Pages: 12-14+18(2021)
- 作者机构：
  
  1. 北京信息科技大学现代测控技术教育部重点实验室
  2. 北京电动车辆协同创新中心
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2021)02-0012-03
  CLC： TP212
- Published：2021
- 稿件说明：
移动端阅览
CHEN Hao, WANG Liyong, CHEN Tao. Analysis and optimization of coil parameters of inductive abrasive monitoring sensor[J]. 2021, (2): 12-14+18.
DOI：

CHEN Hao, WANG Liyong, CHEN Tao. Analysis and optimization of coil parameters of inductive abrasive monitoring sensor[J]. 2021, (2): 12-14+18. DOI： 10.13873/J.1000-9787(2021)02-0012-03.

摘要

根据电感式磨粒传感器的等效电路

推导出传感器感应电动势计算公式

分析传感器的输出特性

通过有限元仿真软件Comsol中建立的传感器线圈电磁模型

采用多因素正交仿真试验对电感式磨粒传感器线圈的间距、宽度和内径进行分析与优化。实验对比表明:优化后传感器输出的感应电动势峰值是优化前输出感应电动势峰值的4.9倍左右

显著提高了电感式磨粒传感器对磨粒的监测效果。

Abstract

According to the equivalent circuit of inductive wear particle sensor

formula of induction electromotive force of sensor is deduced

output characteristic of sensor is analyzed

through the finite element simulation software Comsol

sensor coil electromagnetic model is set up

using multi-factor orthogonal simulation test

inductive wear particle sensor coil spacing

width and diameter are analyzed and optimized. The experimental comparison shows that the peak value of induced electromotive force output by the optimized sensor is 4. 9 times that of the peak value of induced electromotive force output of the sensor before optimization

which significantly improves the monitoring effect of the inductive abrasive particle sensor on abrasive particles.

关键词

Keywords

references

Views

212

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

USV course control by ant colony optimization PID with mutation characteristics

Design of flexible piezoelectric micro-clamp based on stiffness relationship

Research on acoustic emission source localization based on improved multi-output SVM

Topology analysis and optimization of iron core structure based on micro fluxgate

Genetic optimization kernel-based extreme learning machine data classification algorithm

Related Author

FENG Yubo

DING Chengjun

FENG Guoqiang

YUAN Guangming

GAO Xingjun

DENG Zilong

HU Siya

CHEN Xiaodong

Related Institution

School of Mechanical Engineering,Hebei University of Technology

School of Mechanical Engineering,Liaoning Shihua University

Shenyang Institute of Automation,Chinese Academy of Sciences

School of Electrical Engineering and Automation, Henan Polytechnic University

School of Electronics and Information,Northwestern Polytechnical University

⁰