Study on technology of water-based tape casting for limiting current oxygen sensor

LIU Xi; WANG Liang; LIU Zhiyuan; WEN Jiyan; PI Qianqian; SHAO Zhiqiang

doi:10.13873/J.1000-9787(2020)07-0038-03

Chinese

您当前的位置：

首页 >

文章列表页 >

Study on technology of water-based tape casting for limiting current oxygen sensor

更新时间：2025-09-11

- Study on technology of water-based tape casting for limiting current oxygen sensor
- Vol. 39, Issue 7, Pages: 38-40(2020)
- 作者机构：
  
  1. 中国电子科技集团公司第四十九研究所
  2. 中国电子科技集团有限公司
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2020)07-0038-03
  CLC： TP212
- Published：2020
- 稿件说明：
移动端阅览
[1]刘玺,王亮,刘志远,文吉延,皮倩倩,邵志强.极限电流式氧气传感器水基流延成型制备工艺研究[J].传感器与微系统,2020,39(07):38-40.

LIU Xi, WANG Liang, LIU Zhiyuan, et al. Study on technology of water-based tape casting for limiting current oxygen sensor[J]. 2020, 39(7): 38-40.
[1]刘玺,王亮,刘志远,文吉延,皮倩倩,邵志强.极限电流式氧气传感器水基流延成型制备工艺研究[J].传感器与微系统,2020,39(07):38-40. DOI： 10.13873/J.1000-9787(2020)07-0038-03.

LIU Xi, WANG Liang, LIU Zhiyuan, et al. Study on technology of water-based tape casting for limiting current oxygen sensor[J]. 2020, 39(7): 38-40. DOI： 10.13873/J.1000-9787(2020)07-0038-03.

摘要

流延成型工艺是一种重要的平面陶瓷工艺

被广泛应用于多层陶瓷器件的生产。目前工业中的流延成型工艺多数使用易燃、有毒的有机溶剂

对人体和环境造成了严重的危害

不适应环境友好及清洁生产的发展方向。因此

开发以水为溶剂的环保型、绿色化流延成型工艺己经成为目前的发展趋势。采用水基流延成型工艺制备极限电流式氧气传感器敏感元件

在700℃下测量

获得特性较好的极限电流平台。

Abstract

Tape casting is an important plane ceramic technology

which is widely used in the production of multilayer ceramic devices. At present

most of the casting processes in industry use flammable and toxic organic solvents

which cause serious harm to human body and environment

and do not adapt to the development direction of environment-friendly and clean production. Therefore

developing environmentally friendly and green casting process using water as solvent has become the current development trend. Limiting current oxygen sensor is fabricated by the water-based tape casting process. The sensor is measured at 700 ℃

and a good limiting current platform is obtained.

关键词

Keywords

references

丝网印刷法制备极限电流氧传感器扩散孔的研究 [J]. 程楚,王金霞,简家文,邹杰. 传感器与微系统 . 2019(08)

流延共烧法极限电流氧传感器研究 [J]. 邵禹铭,郑雁公,邹杰,简家文. 传感器与微系统 . 2017(04)

内腔室结构对氧气传感器的性能影响研究 [J]. 程迎国,周明军,郝玉芳,朱保峰,刘智敏. 传感器与微系统 . 2010(10)

极限电流型氧传感器的多层共烧制备 [J]. 沈杰,简家文,章东兴,汪益. 传感技术学报 . 2009(11)

极限电流型氧化锆氧分析仪的设计 [J]. 彭洋运,朱双东,简家文. 现代科学仪器 . 2009(05)

固体氧化物燃料电池电解质8YSZ薄膜的水系流延 [J]. 黄祖志,罗凌虹,卢泉,程亮,付长翼,郎莹. 人工晶体学报 . 2008(05)

陶瓷材料水基流延成型工艺研究进展 [J]. 李绍纯,李冬云,杨辉. 材料导报 . 2006(S2)

混合微电子技术在氧化锆基氧传感器上的应用 [J]. 俞守耕. 贵金属 . 2004(03)

Views

104

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on diffused hole of limiting current oxygen sensor fabricated by screen printing method

Research on methane detection based on YSZ-based limiting current type oxygen sensor

Study on preparation technology of porous protective coating slurry for oxygen sensor

Thermo dynamic analysis and structural optimization on limiting current oxygen sensor

Experimental study on temperature characteristics of oxygen sensor on motorcycles with EFI system

Related Author

CHENG Chu

WANG Jinxia

JIAN Jiawen

ZOU Jie

JIAN Jiawen

ZOU Jie

XIA Jihong

CHENG Zhenqian

Related Institution

Ningbo University of Technology

School of Information Science and Engineering,Ningbo University

School of Electronic and Information Engineering,Chongqing University of Arts and Sciences

College of Information Science and Engineering,Ningbo University

College of Information and Communication Engineering,Harbin Engineering University

⁰