Thickness of multi-layers detection by pulsed eddy current and time frequency characteristic extraction

WANG Zhi-chun; WANG Yu-xi

doi:10.13873/J.1000-9787(2018)01-0018-04

Chinese

您当前的位置：

首页 >

文章列表页 >

Thickness of multi-layers detection by pulsed eddy current and time frequency characteristic extraction

更新时间：2025-09-11

- Thickness of multi-layers detection by pulsed eddy current and time frequency characteristic extraction
- Issue 1, Pages: 18-21(2018)
- 作者机构：
  
  内蒙古科技大学信息工程学院
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2018)01-0018-04
  CLC： TG115.28
- Published：2018
- 稿件说明：
移动端阅览
WANG Zhi-chun, WANG Yu-xi. Thickness of multi-layers detection by pulsed eddy current and time frequency characteristic extraction[J]. 2018, (1): 18-21.
DOI：

WANG Zhi-chun, WANG Yu-xi. Thickness of multi-layers detection by pulsed eddy current and time frequency characteristic extraction[J]. 2018, (1): 18-21. DOI： 10.13873/J.1000-9787(2018)01-0018-04.

摘要

脉冲涡流检测是现代无损检测技术的重要方法之一。由于其具有频谱宽、信号穿透能力强以及精度高等特点

目前已广泛应用于金属测厚等领域。基于Ansoft Maxwell软件

建立了脉冲涡流多层金属测厚系统

对不同电导率的金属材料进行了测厚仿真的分析研究

通过改变被测体厚度

分析了检测线圈上的电压随被测体厚度的变化规律

并对脉冲涡流厚度检测信号进行快速傅立叶变换(FFT)

分别从时域和频域进行了特征值的提取

分析了针对不同电导率层

给出了相应较适合的特征值。

Abstract

Pulsed eddy current testing is one of the important methods of modern nondestructive testing technology. Since it has characteristics of wide spectrum

strong signal penetrating power and high precision

at present it has been widely used in metal thickness measurement

etc. Based on Ansoft Maxwell software

pulsed eddy current multi-layer metal thickness measurement system is established

the thickness for different conductivity of metal material simulation analysis and research

by changing the thickness of the tested body

analyze on rule of test coil voltage changing with thickness of the measured body

and FFT is carried out on detecting signal of thickness of pulsed eddy current

extraction of characteristic value is carried out in time domain and frequency domain

analysis on different conductivity layer

and suitable characteristic value is given.

关键词

Keywords

references

Views

282

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design of road corner warning system based on microwave sensor

Error compensation of gyroscope north-seeker based on FFT

Simulation optimization and experiment of pulsed eddy current rectangular sensor parameters

Design of flaw-detecting system for ferromagnetic material based on pulsed eddy current

Simulation research on quantitative detection on cracks based on rectangular PEC sensor

Related Author

CHEN Yao-wu

XIAO Guo-ping

LI Si-hai

ZHANG Wei-xia

WANG Hai-ming

ZHOU De-qiang1

YAN Xiang-yang1

YOU Li-hua1

Related Institution

College of Biomedical Engineering & Instrument Science,Zhejiang University

College of Automation,Northwestern Polytechnical University

Aircraft Design Academy,Shaanxi Aircraft Industry(Group) Co Ltd

Shaanxi Huayan Aero-instrument Co Ltd

Wuxi G S Precision Tool Co Ltd

⁰