Feasibility study of non-ferrous metal defect inspection by electrified magnetic measuring

ZHANG Ji-kai; KANG Yi-hua; LI Dong-lin; DENG Zhi-yang

doi:10.13873/J.1000-9787(2016)08-0047-04

Chinese

您当前的位置：

首页 >

文章列表页 >

Feasibility study of non-ferrous metal defect inspection by electrified magnetic measuring

更新时间：2025-09-11

- Feasibility study of non-ferrous metal defect inspection by electrified magnetic measuring
- Vol. 35, Issue 8, Pages: 47-50(2016)
- 作者机构：
  
  华中科技大学机械科学与工程学院
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2016)08-0047-04
  CLC： TG115.28
- Published：2016
- 稿件说明：
移动端阅览
[1]张继楷,康宜华,李冬林,邓志扬.有色金属通电测磁探伤方法可行性研究[J].传感器与微系统,2016,35(08):47-50.

ZHANG Ji-kai, KANG Yi-hua, LI Dong-lin, et al. Feasibility study of non-ferrous metal defect inspection by electrified magnetic measuring[J]. 2016, 35(8): 47-50.
[1]张继楷,康宜华,李冬林,邓志扬.有色金属通电测磁探伤方法可行性研究[J].传感器与微系统,2016,35(08):47-50. DOI： 10.13873/J.1000-9787(2016)08-0047-04.

ZHANG Ji-kai, KANG Yi-hua, LI Dong-lin, et al. Feasibility study of non-ferrous metal defect inspection by electrified magnetic measuring[J]. 2016, 35(8): 47-50. DOI： 10.13873/J.1000-9787(2016)08-0047-04.

摘要

有色金属零部件应用广泛

但已有的磁性检测方法均不能对其有效探伤。提出一种基于磁场测量的有色金属电磁探伤方法

在有色金属中通以直流电流

其体表会产生一个稳恒磁场

当有色金属表面或内部存在裂纹等缺陷时

有色金属体内电流分布发生变化

引起外部磁场变异

利用高灵敏度梯度磁场传感器测量磁场的畸变

可检出表面微小裂纹和内部缺陷。以铜板为例

建立了仿真模型

分析表面各个方向磁场分量的特征。实验结果表明:裂纹特征参数与测量磁场最大变化量间存在线性关系的结论

对有色金属探伤提供了新的方法。

Abstract

Non-ferrous metal components have been widely used

but present magnetic detection methods are not effective for their detection. A method for non-ferrous metal electromagnetic defect inspection based on magneticfield measurement is put forward. By introducing direct current to non-ferrous metal

a constant magnetic field will be excited on surface of non-ferrous metal. As cracks exist on surface or inside of non-ferrous metal

current distribution inside non-ferrous metal changes

which causes heteromorphosis of external magnetic field

so that tiny cracks on surface and inside defects can be detected by using gradient magnetic field sensor with high sensitivity. Taking copperplate as an example

simulation models are set up to analyze characteristics of magnetic field on surface in all directions. Results of experiment indicate that the maximum variation of measured magnetic field is linear relation to characteristic parameters of crack

which provides a new method for non-ferrous metal detection.

关键词

Keywords

references

一种基于电场测量的无损检测方法 [J]. 李冬林,康宜华,孙燕华,叶志坚. 中国机械工程 . 2015(13)

Effect of residual stress on ACFM crack measurements in drill collar threaded connections [J] . M.J Knight,F.P Brennan,W.D Dover. NDT and E International . 2004 (5)

Loading effect on ACPD of a crack in ferromagnetic material [J] . J. H. Lee,M. Saka,H. Abé. Experimental Mechanics . 1997 (2)

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Magnetic field sensor based on D-shaped PCF  with hybrid-shape air holes

Design and implementation of eddy-current probe for aircraft wheel hub cracks detection

Research on an eddy current sensor used for steel ball surface defect detection

Study on signal processing method based on pulsed eddy current sensor of InSb magnetoresistor

Digital weak magnetic field measurement instrument based on Co-based amorphous wire

Related Author

GAO Zhijun

LAI Fanian

WANG Jinhao

YING Yu

SUN Hui-xian

Lü Deng-long

ZHANG Yu-hua

LU Ya-peng2

Related Institution

Building Intelligence Perception and Security Detection Research Office,School of Electrical and Control Engineering,Shenyang Jianzhu University

Department of Electrical Engineering,Ordnance Engineering College

Shandong University of Science and Technology

The No.3 Coal Mine Yanzhou Mining Group Co Ltd

College of Automation Engineering,Nanjing University of Aeronautics and Astronautics

⁰