Communication protocol setting and software design of new PM sensor

WANG Xi-fan; TANG Dong; XU Ya-chao; CHEN Lie

doi:10.13873/J.1000-9787(2015)05-0095-04

Chinese

您当前的位置：

首页 >

文章列表页 >

Communication protocol setting and software design of new PM sensor

更新时间：2025-09-11

- Communication protocol setting and software design of new PM sensor
- Vol. 34, Issue 5, Pages: 95-98(2015)
- 作者机构：
  
  1. 江苏大学
  2. 金坛鸿鑫电子科技有限公司
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2015)05-0095-04
  CLC： TP212;U463.6
- Published：2015
- 稿件说明：
移动端阅览
[1]王希凡,汤东,徐亚超,陈烈.新型PM传感器通信协议设定与软件设计[J].传感器与微系统,2015,34(05):95-98.

WANG Xi-fan, TANG Dong, XU Ya-chao, et al. Communication protocol setting and software design of new PM sensor[J]. 2015, 34(5): 95-98.
[1]王希凡,汤东,徐亚超,陈烈.新型PM传感器通信协议设定与软件设计[J].传感器与微系统,2015,34(05):95-98. DOI： 10.13873/J.1000-9787(2015)05-0095-04.

WANG Xi-fan, TANG Dong, XU Ya-chao, et al. Communication protocol setting and software design of new PM sensor[J]. 2015, 34(5): 95-98. DOI： 10.13873/J.1000-9787(2015)05-0095-04.

摘要

为了使集成CAN总线技术的颗粒物（PM）传感器能够与发动机的其它控制单元之间实现数据共享

以汽车行业比较通用的SAE J1939协议为传感器制定通信协议。同时采用模块化思路设计PM传感器控制系统软件

最后对控制系统的各个功能模块进行了实验验证。结果表明:PM传感器控制系统的设计和制作能够满足应用需求

为进一步推进PM传感器在实车上的应用打下了基础。

Abstract

In order to share data between particulate matter（ PM） sensor with integration CAN bus technology and other control units in engine

develop communication protocol for sensor based on SAE J1939 protocol widely used in auto industry. Then adopt modularization idea to design PM sensor control system software

finally experiments are done to verify each function module. The results show that the design and production of control system can meet application requirement of PM sensor

which lays foundation for PM sensor applications in real vehicles.

关键词

Keywords

references

电动汽车动力总成系统控制器局域网（CAN）总线通信协议 [J]. 李芳,张俊智,王丽芳,廖承林. 机械工程学报 . 2008(05)

基于CAN总线的网络化汽车传感器的研究与设计 [J]. 农毅. 传感器与微系统 . 2007(08)

SAE J1939协议在车辆上的应用 [J]. 高松,高燕,王吉华. 拖拉机与农用运输车 . 2006(06)

单片机系统中应用的几种数字滤波方式 [J]. 杨剑,刘光斌. 微计算机应用 . 2006(01)

基于单片机系统的数字滤波方法的研究 [J]. 向红军,雷彬. 电测与仪表 . 2005(09)

Views

109

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design of communication protocol for water quality monitoring platform based on FPGA

Design and implementation of multi-sensor information processing and display system

Multi-node test and calibration of automotive plate-type oxygen sensor

Research progress on Diesel particulate matter real-time diagnostic sensor technology

Development of communication protocol for robot based on mx Automation Interface

Related Author

ZHONG Weisheng

XU Hualong

SHI Jiankang

XIE Baorong

GE Yajing

LIU Tao

LU Can

LIU Anyang

Related Institution

School of Information Engineering,Nanchang University

Shanghai Eastern Flight Training Co Ltd

College of Electronic Information and Automation,Civil Aviation University of China

East China Institute of Electron IC

Postgraduate Battalion,Army Military Transportation University

⁰