Research on optimal pose of laser sensor based on orthogonal test

CHEN Yong; LU Zhang-ping; WANG Hao-tian; SHA Chun-fa; CHEN Ping-hua; ZHENG Hang

doi:10.13873/J.1000-9787(2014)11-0065-04

Chinese

您当前的位置：

首页 >

文章列表页 >

Research on optimal pose of laser sensor based on orthogonal test

更新时间：2025-09-11

- Research on optimal pose of laser sensor based on orthogonal test
- Vol. 33, Issue 11, Pages: 65-68+85(2014)
- 作者机构：
  
  1. 江苏大学机械工程学院
  2. 江苏申模数字化制造技术有限公司
- 作者简介：
- 基金信息：
- DOI：10.13873/J.1000-9787(2014)11-0065-04
  CLC： TP212
- Published：2014
- 稿件说明：
移动端阅览
[1]陈勇,卢章平,王浩田,沙春发,陈萍华,郑航.基于正交试验的激光传感器最优位姿研究[J].传感器与微系统,2014,33(11):65-68+85.

CHEN Yong, LU Zhang-ping, WANG Hao-tian, et al. Research on optimal pose of laser sensor based on orthogonal test[J]. 2014, 33(11): 65-68+85.
[1]陈勇,卢章平,王浩田,沙春发,陈萍华,郑航.基于正交试验的激光传感器最优位姿研究[J].传感器与微系统,2014,33(11):65-68+85. DOI： 10.13873/J.1000-9787(2014)11-0065-04.

CHEN Yong, LU Zhang-ping, WANG Hao-tian, et al. Research on optimal pose of laser sensor based on orthogonal test[J]. 2014, 33(11): 65-68+85. DOI： 10.13873/J.1000-9787(2014)11-0065-04.

摘要

为自主研发激光检测系统

通过正交试验法对LJ—V7060型的激光传感器进行了最优位姿试验

研究了表面粗糙度、倾斜角度和扫描距离对激光传感器最优位姿的影响

得出了激光传感器在特定的倾斜角度和扫描距离在激光传感器测量范围中间位置时使用性能最佳。为检测系统路径规划提供了试验参考

为企业实际应用提供了理论依据

具有一定工程应用价值。

Abstract

For independently research and develop laser detection system

through orthogonal test method

the optimal pose test is carried out on laser sensor LJ—V7060

effect of surface roughness

slope angle and scanning distance on the optimal pose of laser sensor

it is derived that application performance is the best when laser sensor in the specific tilt angles and scanning distance in the middle position of laser sensor measuring range. It provides test reference for detecting system path planning

and provides theoretical basis for practical application of enterprise

has certain engineering application value.

关键词

Keywords

references

正交试验设计和分析方法研究 [J]. 刘瑞江,张业旺,闻崇炜,汤建. 实验技术与管理 . 2010(09)

三维激光扫描拟合平面自动提取算法 [J]. 潘国荣,秦世伟,蔡润彬,谷川. 同济大学学报(自然科学版) . 2009(09)

激光位移传感器数据采集技术 [J]. 王世峰,赵馨,佟首峰,刘云清,刘鹏,姜会林. 微计算机信息 . 2008(04)

基于正交试验的Cu-Ni-Si合金加工工艺研究 [J]. 王东锋,汪定江,康布熙,田保红. 功能材料 . 2007(01)

三角法光学非接触测量头应用中的关键技术 [J]. 吴奎先,杨仁平,张国雄,李敬杰,裘祖荣,于复生,冷长林. 天津大学学报 . 2005(01)

正交试验设计的理论分析方法及应用 [J]. 董如何,肖必华,方永水. 安徽建筑工业学院学报(自然科学版) . 2004(06)

正交试验设计法简介 [J]. 徐仲安,王天保,李常英,暴丽艳,马青梅,苗玉宁. 科技情报开发与经济 . 2002(05)

间接测量结果估计及其数据处理 [J]. 田社平. 计量技术 . 1998(05)

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis and optimization of coil parameters of inductive abrasive monitoring sensor

Study of outline shape measurement method of rice seed based on laser sensor

Application of wavelet analysis in laser ranging sensor

Large free-form surface measurement system based on laser line-scan sensor

Research and fabrication of portable laser measuring instrument for catenaries geometry parameter

Related Author

CHEN Tao

WANG Liyong

CHEN Hao

YANG Zhi-jun

FAN Li

WANG Chuan

WU Lin-hua

YIN Wen-qing

Related Institution

Key Laboratory of Ministry of Education for Modern Measurement and Control Technology,Beijing Information Science ＆ Technology University

Collaborative Innovation Center for Electric Vehicles

Key Laboratory of Intelligent Equipment for Agriculture of Jiangsu Province,College of Engineering,Nanjing Agricultural University

School of Information Engineering,Taiyuan University of Technology

National Institute of Metrology

⁰