1. 军械工程学院电气工程系
2. 西安电子科技大学生命科学技术学院
3. 西北大学信息科学与技术学院
纸质出版:2012
移动端阅览
[1]陈鹏,李固,边雁,蔡强富,吴佳丽.采用RLC激励的EMAT圆柱探头设计参数分析[J].传感器与微系统,2012,31(02):77-80.
CHEN Peng1, LI Gu1, BIAN Yan2, et al. Analysis of EMAT cylinder probe design parameter by RLC inspiriting[J]. 2012, 31(2): 77-80.
[1]陈鹏,李固,边雁,蔡强富,吴佳丽.采用RLC激励的EMAT圆柱探头设计参数分析[J].传感器与微系统,2012,31(02):77-80. DOI: 10.13873/j.1000-97872012.02.007.
CHEN Peng1, LI Gu1, BIAN Yan2, et al. Analysis of EMAT cylinder probe design parameter by RLC inspiriting[J]. 2012, 31(2): 77-80. DOI: 10.13873/j.1000-97872012.02.007.
电磁超声换能器(EMAT)的线圈探头是激发和接收检测信号的传感器
为获得满足检测需要的具有一定频率和幅值的超声信号
需要对线圈探头进行合理的结构设计
以提高检测效率。在介绍RLC脉冲激励源原理的基础上
提出了空心圆柱线圈探头
并针对探头在激励和换能过程中的双重作用
详细分析了线圈探头的各种参数对激励信号源和检测效能的影响
为采用RLC脉冲放电激励的线圈探头设计提供了理论和实际指导。依据分析结果
设计了探头线圈和实验检测系统
证明了理论分析的正确性。
EMAT is a transducer used to inspirit and receive testing signal
in order to get ultrasound signal with certain frequency and amplitude
it’s necessary to design rationally coil probe for improving testing efficiency.Hollow cylinder coil probe on the basis of introducing principle of RLC impulse excitation source is proposed.Effect of that kinds of coil parameters on inspiriting signal source and testing effect is analyzed particularly.Aiming at double function between inspiriting and energy conversion of probe
which provides theoretical and practical guidance for design of coil probe by RLC impulse exciting source.Probe coil and experimental testing system are designed according to analysis results
experiment proves the correctness of theoretical analysis.
电磁超声换能器的研究进展综述 [J]. 王淑娟,康磊,赵再新,翟国富. 仪表技术与传感器 . 2006(05)
电磁超声技术在钢板缺陷检测中的研究 [D]. 任晓可. 天津大学 2008
电磁脉冲及其工程防护[M]. 国防工业出版社 , 周璧华等著, 2003
超声检测新技术[M]. 科学出版社 , (英)西拉德(Szilard,E.J.)主编, 1991
0
浏览量
133
下载量
5
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621