ZHANG Dong-xing, ZOU Jie. Fabrication of NH3 sensor with NiO sensitive electrode and its response performance[J]. 2018, (8): 33-36. DOI: 10.13873/j.1000-9787(2018)08-0033-04.
NiO敏感电极NH3传感器制备及其响应性能
摘要
以Ni O为敏感电极材料
钇稳定氧化锆(YSZ)陶瓷片为电解质材料
采用丝网印刷技术制备了片式混合电势型NH3传感器
对传感器在不同NH3浓度和不同工作温度下响应性能进行了研究。结果显示:在工作温度为550℃时
传感器对NH3的响应值最大
达到-57 m V。制备的传感器在550℃时
对(50
6
00)×10-6NH3具有良好的响应性能
响应信号与NH3浓度的对数呈现出良好的线性关系。在550℃高温时
传感器表现较好的重复性
但其交叉敏感性有待提高。为阐述传感器的敏感机理
进行了交流阻抗测试研究。
Abstract
Mixed potential-type planar NH3 sensor using yttria-stabilized zirconia( YSZ) as electrolyte material and Ni O as sensitive electrode material is fabricated by means of screen-printing technology. The response characteristics of sensor is evaluated under different concentrations of NH3 and working temperatures. The results indicate that the response value reaches the largest at temperature of 550 ℃
which reaches-57 m V. The sensor shows good response to( 50
600) × 10-6 NH3 and the response signal has good linear relationship with logarithm of NH3 concentration. At 550 ℃
the sensor shows good repeatability. However
the cross-sensitivity of sensor needs to be improved. In addition
AC impedance test resear
ch is carried out to explain the sensitive mechanism of the sensor.