YANG Ben-chen, HE Jing-xiang, CAO Liu. Induction motor DTC based on fuzzy sliding mode control with load torque compensation[J]. 2017, 36(7): 103-105+109.
YANG Ben-chen, HE Jing-xiang, CAO Liu. Induction motor DTC based on fuzzy sliding mode control with load torque compensation[J]. 2017, 36(7): 103-105+109. DOI: 10.13873/j.1000-9787(2017)07-0103-03.
Aiming at problem of torque ripple and bad anti-interference capability of induction motor( IM)
a novel direct torque control( DTC) based on fuzzy sliding mode control( FSMC) with load torque compensation is designed. The conventional PID speed regulator is replaced by a sliding mode controller. To solve the problem of torque ripple of load in sliding mode controller
a fuzzy logic controller replaces the discontinuous part of the conventional sliding mode control law. It can obviously reduce the torque ripple of IM at low speed. In addition
a load torque observer is proposed to estimate the unknown load torque. The load torque observer is used to estimate load torque disturbances and the estimation is used as the feed-forward compensation in the speed loop. The simulation results show that the design has better dynamic response and speed performance
high robustness and strong anti-interference to load torque disturbance at low speed.
Nonlinear torque and stator flux controller for induction motor drive based on adaptive input–output feedback linearization and sliding mode control [J] . R. Yazdanpanah,J. Soltani,G.R. Arab Markadeh. Energy Conversion and Management . 2007 (4)