刘俊涛,周敏,谢良喜,陈燕军.室内墙面砂浆抹平机器人性能研究[J].传感器与微系统,2023(07).

高春艳,陶渊,吕晓玲,张明路.非结构化环境下巡检机器人环境感知技术研究综述[J].传感器与微系统,2023(04).

蔡琪琳.复杂曲面数控加工技术及其应用研究[J].现代工业经济和信息化,2022(08).

郝晓伟,刘佳,杨胜强,屈展.机器人变抛磨头抛磨系统搭建及其实验研究[J].机械设计与制造,2022(06).

袁绍斌,段昌德,吴家奎,陈道全,曹波,艾贵洪.复杂曲面数控加工切削力优化应用研究[J].航空精密制造技术,2021(04).

施群,吕雷,谢家骏,陶佳安.基于自由曲面有向Voronoi区域划分算法的机器人加工刀轴低摆振路径规划[J].计算机集成制造系统,2019(05).

樊文刚,刘月明,王文玺,李建勇,王荣全.基于弹性赫兹接触的钢轨砂带打磨材料去除建模研究[J].机械工程学报,2018(15).

Chang Guangsheng,Pan Ri,Xie Yinhui,Yang Jinxing,Yang Yong,Li Jun.Research on constant force polishing method of curved mold based on position adaptive impedance control[J].The International Journal of Advanced Manufacturing Technology,2022.

School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China,School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China,School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China,School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China,School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China,School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China.Contact force control and vibration suppression in robotic polishing with a smart end effector[J].Robotics and Computer-Integrated Manufacturing,2019.

Seul Jung,T. C. Hsia,Robert G. Bonitz.Force Tracking Impedance Control of Robot Manipulators Under Unknown Environment[J].IEEE transactions on control systems technology: A publication of the IEEE Control Systems Society,2004.

Hogan Neville.Impedance Control: An Approach to Manipulation: Part II—Implementation[J].Journal of Dynamic Systems, Measurement, and Control,1985(1).

A Sackfield,D A Hills.Some useful results in the classical Hertz contact problem[J].The Journal of Strain Analysis for Engineering Design,1983(2).