田晓超,林佳颖,王志聪,王虎,张思达,杨志刚.晶片型压电换能器发电能力影响因素分析[J].传感器与微系统,2022(12).

刘盛文,王露,翟迪,袁晰,周科朝,张斗.1-3型压电复合材料的机电响应特性和温度稳定性[J].压电与声光,2022(04).

姚乐云,刘冬,李江,袁晰,王晓宇,张斗,熊慧文.直写成型制备的3-3型PZT压电复合材料及其性能[J].压电与声光,2022(04).

李尚宫,洪晓东,李永川.基于压电复合材料的二维面阵超声换能器性能研究[J].传感器与微系统,2022(04).

黄艳伟,陆伟豪.锆钛酸钡陶瓷的Fe掺杂改性与电学性能研究[J].传感器与微系统,2022(01).

王天资,周志勇,李伟,董显林,张磊.高温压电振动传感器及陶瓷材料研究应用进展[J].传感器与微系统,2020(06).

王改丽,白智奇,申丽丽,廖擎伟,李晋忠.几种1-3-2型压电复合材料温度弯曲形变及相关参数测试研究[J].电子元件与材料,2020(02).

秦雷,鲜晓军,贾俊博,杜海波,王丽坤.1-1-3型压电复合材料的水声换能器研究[J].压电与声光,2018(04).

李起栋,李金平,陈丽洁,张鹏,赵异凡,魏鸿雁.谐振式高灵敏度矢量水听器设计[J].传感器与微系统,2018(06).

李莉,王丽坤,秦雷.有限元法分析1-3型压电复合材料换能器[J].压电与声光,2015(03).

沈美娥,朱嘉林,李炜.0-3型压电复合材料圆柱形水听器[J].压电与声光,2006(06).

Wang Hongwei,Li Yang,Hui Hui,Rong Tian.Analysis of electromechanical characteristics of the 1-3-2 piezoelectric composite and 1-3-2 modified structural material[J].Ceramics International,2022.

Huang Qiguo,Wang Hongwei.Research and preparation of a tri-ring stacking round tubular ultrasonic transducer[J].Ferroelectrics,2021.

Xia Lili,Wang Hongwei,Huang Qiguo.Design and Fabrication of a Stacked Three-Phase Piezoelectric Composites Ring Array Underwater Ultrasound Transducer[J].Materials,2021.

Smith W A.Modeling 1-3 composite piezoelectrics: hydrostatic response.[J].IEEE transactions on ultrasonics, ferroelectrics, and frequency control,1993(1).

栾桂冬,张金铎,王仁乾编著.压电换能器和换能器阵[M].北京大学出版社,2005.