Liang Chen,Wenwen Gu,Quan Wen,Dongling Li,Hongjie Lei,Jie Huang.Highly reliable electromagnetic MOEMS scanning grating mirror based on folded torsion beam with fillet corners[J].Modern Physics Letters B,2020.

Karlmarx G K Periyasamy,Hui Zuo,Siyuan He.Flexible printed circuit boardmagnetic micromirror for laser marking/engraving[J].Journal of Micromechanics and Microengineering,2019.

Bo Jiang,Mingdi Peng,Yongtao Liu,Tong Zhou,Yan Su.The fabrication of 2D micromirror with large electromagnetic driving forces[J].Sensors & Actuators: A. Physical,2019.

Ju Suna,Jeong Haesoo,Park Jae Hyoung,Bu Jong Uk,Ji Chang Hyeon.Electromagnetic 2D Scanning Micromirror for High Definition Laser Projection Displays[J].IEEE Photonics Technology Letters,2018.

Dong Ruili,Tan Yonghong,Tan Qingyuan.Mirror Angle Tuning of Electromagnetic Micro-Mirrors With Oscillation Compensation[J].IEEE Transactions on Systems, Man, and Cybernetics: Systems,2018.

Liangchen Ye,Gaofei Zhang,Zheng You,Huikai Xie.Large-Aperture kHz Operating Frequency Ti-alloy Based Optical Micro Scanning Mirror for LiDAR Application[J].Micromachines,2017.

Prem Pal,Kazuo Sato.A comprehensive review on convex and concave corners in silicon bulk micromachining based on anisotropic wet chemical etching[J].Micro and Nano Systems Letters,2015.

Guo Liang,DeWeerth Stephen P.An effective lift-off method for patterning high-density gold interconnects on an elastomeric substrate.[J].Small (Weinheim an der Bergstrasse, Germany),2010.

Il-Joo Cho,Euisik Yoon.A low-voltage three-axis electromagnetically actuated micromirror for fine alignment among optical devices[J].Journal of Micromechanics and Microengineering,2009.

Arda D. Yalcinkaya,Hakan Urey,Dean Brown,Tom Montague,Randy Sprague.Two-Axis Electromagnetic Microscanner for High Resolution Displays[J].Journal of Microelectromechanical Systems: A Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems,2006.

Wolter Alexander,Schenk Harald,Korth Hilmar,Lakner Hubert.Torsional stress, fatigue and fracture strength in silicon hinges of a micro scanning mirror[J].Fraunhofer-Institut fuer Photonische Mikrosysteme (Germany),2003.

Zhili Hao,Rod Clark,Jay Hammer,Michael Whitley,Brian Wingfield.Modeling air-damping effect in a bulk micromachined 2D tilt mirror[J].Sensors & Actuators: A. Physical,2002.

Pan F.,Peeters E.,Tran AT.,Mukherjee S.,Kubby J..Squeeze film damping effect on the dynamic response of a MEMS torsion mirror[J].Journal of Micromechanics and Microengineering,1998(3).

Tsuchiya T.,Tabata O..Specimen size effect on tensile strength of surface-micromachined polycrystalline silicon thin films[J].Journal of Microelectromechanical Systems: A Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems,1998(1).

董康佳,姜晨,任绍彬,郎小虎,高睿,叶卉.砷化镓晶体力学特性的各向异性计算[J].无机材料学报,2021(06).

韩熠,宋凤民,李廷华,陈李,吴俊,朱东来.MEMS单晶硅加热雾化芯片设计与制作[J].传感器与微系统,2019(10).

穆参军,张飞岭,张宁,赵本刚,吴亚明.端面约束单晶硅直梁MEMS扫描微镜应力特性研究[J].机械强度,2009(02).

韩光平,刘凯,王秀红.单晶硅微桥式梁力学性能的弯曲测试[J].仪器仪表学报,2006(02).