吕金洲,李世超,张小庆,杨大伟,刘建霞,贺佳佳.脉冲风洞天平-模型支撑一体化测力技术研究[J].推进技术,2022(10).

苗磊,马涛,徐志伟,谢斌,周米文.热力耦合作用下的风洞应变天平校准技术[J].仪器仪表学报,2022(03).

马成聪,王卫英.一种带过载保护的盒式六分量天平的研制[J].机械工程与自动化,2020(03).

任宗金,张亚娟,张军,杜瑞锋,徐田国.大长径比模型多维气动力测量天平设计[J].传感器与微系统,2019(02).

赵莉,邹满玲,田静琳,羊玺.国外低温内式应变天平技术研究进展[J].实验流体力学,2016(06).

贺伟,高昌,张小庆,于时恩.脉冲燃烧风洞测力天平研制与应用[J].实验流体力学,2016(04).

汪运鹏,刘云峰,苑朝凯,罗长童,王春,胡宗民,韩桂来,赵伟,姜宗林.长试验时间激波风洞测力技术研究[J].力学学报,2016(03).

于常安,王罗,何显中,邱荣凯,姚程炜.航空矢量喷管测试平台用六分量盒式天平结构设计[J].航空动力学报,2016(01).

杨双龙,徐科军,赵长辉,张平.基于DSP的杆式风洞天平实时动态补偿系统[J].传感器与微系统,2010(01).

徐科军,杨双龙,张进,赵长辉,张平.杆式风洞应变天平动态实验、建模与补偿[J].仪器仪表学报,2009(10).

刘高计,谌满荣,于卫青.风洞应变天平优化设计方法研究[J].弹箭与制导学报,2006(02).

李盼.全动舵面风洞模型气动载荷测量的压电天平研究[D].大连理工大学,2018(02).

Rohit Kumar,B N Ravi Srivatsa,Balaji Subramanian.Calibration design evaluations through computational analysis and investigation of a six-component wind tunnel balance[J].ISSS Journal of Micro and Smart Systems,2021.

A.R. Tavakolpour-Saleh,A.R. Setoodeh,M. Gholamzadeh.A novel multi-component strain-gauge external balance for wind tunnel tests: Simulation and experiment[J].Sensors & Actuators: A. Physical,2016.

Günter Schewe,Christian Steinhoff.Force measurements on a circular cylinder in a Cryogenic Ludwieg-Tube using piezoelectric transducers[J].Experiments in Fluids: Experimental Methods and Their Applications to Fluid Flow,2007.