改进Q学习的薄壁结构3D打印路径规划[J]. 王祎;葛静怡;薛昕惟;王胜法;李凤岐.计算机工程与应用,2022(12)

基于马尔科夫决策过程的WSNs节点检测方法[J]. 刘宏;吕孟伟;关业欢.传感器与微系统,2021(07)

智能3D打印路径规划算法[J]. 杨德成;李凤岐;王祎;王胜法;殷慧殊.计算机科学,2020(08)

基于深度强化学习的机械臂容错控制方法[J]. 李铭浩;张华;刘满禄;李新茂;周祺杰.传感器与微系统,2020(01)

面向3D打印的结构优化研究进展[J]. 徐文鹏;苗龙涛;刘利刚.计算机辅助设计与图形学学报,2017(07)

3D打印的路径规划研究综述[J]. 侯章浩;乌日开西·艾依提.机床与液压,2016(05)

3D打印中的几何计算研究进展[J]. 刘利刚;徐文鹏;王伟明;杨周旺;刘秀平.计算机学报,2015(06)

增材制造(3D打印)技术发展[J]. 卢秉恒;李涤尘.机械制造与自动化,2013(04)

Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review[J]. Jingchao Jiang;Yongsheng Ma.Micromachines,2020

Application of Deep Reinforcement Learning in Traffic Signal Control: An Overview and Impact of Open Traffic Data[J]. Martin Gregurić;Miroslav Vujić;Charalampos Alexopoulos;Mladen Miletić.Applied Sciences,2020

Continuous toolpath planning in a graphical framework for sparse infill additive manufacturing[J]. Prashant Gupta;Bala Krishnamoorthy;Gregory Dreifus.Computer-Aided Design,2020

Path Optimization Along Lattices in Additive Manufacturing Using the Chinese Postman Problem[J]. Dreifus Gregory;Goodrick Kyle;Giles Scott;Patel Milan;Foster Reed Matthew;Williams Cody;Lindahl John;Post Brian;Roschli Alex;Love Lonnie;Kunc Vlastimil.3D Printing and Additive Manufacturing,2017

Connected fermat spirals for layered fabrication[J]. Haisen Zhao;Fanglin Gu;Qi-Xing Huang;Jorge Garcia;Yong Chen;Changhe Tu;Bedrich Benes;Hao Zhang;Daniel Cohen-Or;Baoquan Chen.ACM Transactions on Graphics (TOG),2016

Equidistant path generation for improving scanning efficiency in layered manufacturing[J]. Y. Yang;H.T. Loh;J.Y.H. Fuh;Y.G. Wang.Rapid Prototyping Journal,2002

The optimal zigzag direction for filling a two-dimensional region[J]. V.T. Rajan;Vijay Srinivasan;Konstantinos A. Tarabanis.Rapid Prototyping Journal,2001

基于分形中Hilbert曲线的复杂曲面加工刀具轨迹规划算法研究[D]. 李万军.南京航空航天大学,2012(02)