1. 武汉科技大学冶金装备及其控制教育部重点实验室
2. 武汉科技大学机械传动与制造工程湖北省重点实验室
纸质出版:2023
移动端阅览
肖洒, 邹光明, 侯宇, 等. 含有针阀的气泡雾化喷嘴结构与工艺参数仿真[J]. 传感器与微系统, 2023,(7):18-22.
肖洒, 邹光明, 侯宇, 等. 含有针阀的气泡雾化喷嘴结构与工艺参数仿真[J]. 传感器与微系统, 2023,(7):18-22. DOI: 10.13873/J.1000-9787(2023)07-0018-05.
为提高模具喷油润滑的效果,设计了一种带有针阀的气泡雾化喷嘴。通过Fluent对喷嘴进行仿真分析,研究了喷嘴收敛角、针阀开度和气液比(GLR)对喷嘴出口平均速度和截面含气率的影响。结果表明:针阀开度小于0.2 mm时,喷嘴出口平均速度随针阀开度增大而减小;针阀开度增大到0.2 mm后,出口平均速度不再受针阀开度影响,此时,出口平均速度随收敛角增大而减小;但当收敛角大于110°后,收敛角的变化对出口平均速度的影响可忽略;随着GLR增大,喷嘴出口平均速度近似呈线性增大;出口截面含气率只受GLR的影响,且随着GLR的增大而增大;但随着GLR的增大,GLR对截面含气率的影响逐渐减弱。仿真结果为气泡雾化喷嘴的设计提供理论指导。
基于内外流场关联的喷嘴仿真及实验研究[J]. 王唯博;高贵军;郑杰;杨文强;游青山.机电工程,2022(04)
非全周开口滑阀的流场特性及其优化[J]. 宋子龙;张晓俊;梁义维;张杰.机电工程,2022(03)
基于两相流空穴模型的比例阀流量特性分析[J]. 谭正生.机电工程,2022(03)
低压气泡雾化的实验及数值模拟研究[J]. 樊恩玺;陈健.消防科学与技术,2020(11)
气泡雾化喷嘴泡状流喷雾特征试验与仿真[J]. 孙春华;宁智;乔信起;李元绪;吕明.农业机械学报,2019(10)
气泡雾化喷嘴泡状流出口喷雾脉动特征[J]. 孙春华;宁智;乔信起;李元绪;吕明.化工学报,2018(10)
气泡雾化喷嘴内部气液两相流场的研究[J]. 蒋丽莎;钱丽娟;宋少波.计算机仿真,2018(06)
基于气泡雾化法的新型锅炉燃烧机设计[J]. 聂荣臻.林业机械与木工设备,2018(06)
柴油喷油嘴内残余气泡的形成以及对初始近场雾化影响研究[D]. 万超辉.南昌大学,2018(12)
气泡雾化喷嘴气液两相流动的数值模拟研究[D]. 李楠.北京交通大学,2015(10)
Spraying of Viscous Liquids: Influence of Fluid-Mixing Mechanism on the Performance of Internal-Mixing Twin-Fluid Atomizers[J]. Marek Mlkvik;Jan Jedelsky;Heike P. Karbstein;Volker Gaukel.Applied Sciences,2020
Experimental Characterization of a Liquid Jet Emanating From An Effervescent Atomizer[J]. Sivadas V.;Balaji K.;Vishwakarma Antriksha;Manikandan Sundar Ram.Journal of Fluids Engineering,2020
An experimental analysis of the spraying processes in improved design of effervescent atomizer[J]. Matouš Zaremba;Jiří Kozák;Milan Malý;Lukas Weiß;Pavel Rudolf;Jan Jedelský;Miroslav Jícha.International Journal of Multiphase Flow,2018
EFFERVESCENT ATOMIZATION FOR INDUSTRIAL ENERGY-TECHNOLOGY REVIEW[J]. Dancho Konstantinov;Richard Marsh;Phil Bowen.Atomization and Sprays: Journal of the International Institutes for Liquid Atomization and Spray Systems,2010
Investigation and comparison of performance of effervescent and standard pneumatic atomizer intended for soluble aqueous coating.[J]. Nielsen Anne Flachs;Poul Bertelsen;Kristensen Henning Gjelstrup;Kristensen Jakob;Hovgaard Lars.Pharmaceutical development and technology,2006
Structure and steady-state spray performance of an effervescent diesel injector[J]. Sandeep D. Sovani;John D. Crofts;Paul E. Sojka;Jay P. Gore;Wayne A. Eckerle.Fuel,2005
Effervescent atomization of aqueous polymer solutions and dispersions.[J]. Petersen F J;Wørts O;Schaefer T;Sojka P E.Pharmaceutical development and technology,2001
Effervescent atomization[J]. S.D Sovani;P.E Sojka;A.H Lefebvre.Progress in Energy and Combustion Science,2001
EFFERVESCENT ATOMIZATION AT INJECTION PRESSURES IN THE MPa RANGE[J]. Robert A. Wade;Jennifer M. Weerts;Jay P. Gore;W. A. Eckerle.Atomization and Sprays,1999(6)
A Design Procedure for Effervescent Atomizers[J]. Chin J. S.;Lefebvre A. H..Journal of Engineering for Gas Turbines and Power,1995(2)
A Novel Method of Atomization with Potential Gas Turbine Applications[J]. Lefebvre Arthur H..Defence Science Journal,1988(4)
0
浏览量
135
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621