PENG Lu-jia, ZHANG Li-ping, HUANG Bo, et al. Design and implementation of vehicle intelligent fan system based on STM32[J]. 2018, (12): 76-78+82. DOI: 10.13873/J.1000-9787(2018)12-0076-03.
基于STM32的车载智能风扇系统的设计与实现
摘要
针对夏天汽车刚启动时车内温度较高
而空调降温短时间内无法达到人体舒适温度的问题
提出了车载智能风扇系统
主要是为了优化生活中的通用串行总线(USB)风扇
并将其应用到车辆中
使风扇能够根据车内环境温度自动调整风速降温。系统以STM32为主控芯片
设有温度检测模块
电机调速模块
液晶显示(LCD)模块
经过硬件连接并编程调试后
实现了风扇根据车内环境温度的变化
自动开启和停止
实验数据分析表明:设计的系统可实现风扇根据车内环境温度的变化智能调速
此外
液晶显示屏能对当前温度和风扇的转动状态进行显示。
Abstract
Aiming at problem that when the car starts in summer
the temperature inside the car is higher
and the air conditioner can not reach the comfortable temperature of the human body in a short time
vehicle intelligent fan system is put forward. The main purpose is to optimize the universal serial bus( USB) fan in the life and apply it to vehicles
so that the fan can automatically adjust wind speed according to environmental temperature inside the car
and reduce the temperature of the passengers. The system uses STM32 as the main control chip
it also has a temperature detection module
motor control module and liquid crystal display( LCD) module. After the hardware connection and programming debugging
the fan is automatically opened and stopped according to the change of the environmental temperature inside the car. Analysis on experimental data shows that the system can realize the intelligent speed regulation of the fan according to the change of the temperature in the car. Besides
the LCD can display the current temperature and the rotating state of the fan.