ZHOU Xiao-yu, ZHANG Meng-ying, DU Li-dong, et al. Design of high-precision silicon piezoresistive gas pressure sensor system[J]. 2017, 36(4): 97-99. DOI: 10.13873/J.1000-9787(2017)04-0097-03.
高精度硅压阻式气压传感器系统设计
摘要
为了消除环境温度对硅压阻式传感器输出的影响
大幅提升硅压阻式传感器的测量精度
将传感器芯片与热源和测温原件封装在一起
通过控制加热的方式使传感器工作在恒定50℃的环境中
对传感器进行线性标定和测试。结果显示:在-45
4
5℃环境下
600
1
100 h Pa量程内气压传感器的测量误差小于0.3 h Pa。
Abstract
Greatly affected by the environment in which the most obvious effect of temperature. In order to eliminate influence of ambient temperature on output of silicon piezoresistive sensor
greatly enhance measurement precision of piezoresistive silicon sensor
sensor chip and heat source and temperature-sensitive components are packaged together
by controlling heating mode
sensor can work in environment of constant 50 ℃ and linear calibration and testing are carried out. At-45
45 ℃ temperature measurement error of air pressure sensor system is less than 0. 3 h Pa at range of 600